Physical security

Security cameras

Features

  • 2-way audio
  • Night vision (infrared LEDs)
  • ONVIF
  • Power over Ethernet (PoE)
  • RTSP
  • Wi-Fi
    • An intruder can jam Wi-Fi signal quite easily, so a physical connection should be used if at all possible.

Firmware

  • OpenIPC
  • Thingino
    • Installation instructions
    • Home Assistant compatible as generic cameras
      • Home Assistant integration has been requested
      • Still image URL: http://CAMERA_IP/image.jpg
      • Stream source URL: rtsp://CAMERA_IP/ch0
      • RTSP transport protocol: TCP
      • Authentication: basic
      • Username & password: set at Thingino → Settings → RTSP/ONVIF Access
      • Frame rate: same as the value at Settings → Streamer/OSD → Main stream → FPS
    • Upgrading
      • Full upgrade = update firmware and bootloader, and erase all data
      • Partial upgrade = upgrade firmware only
    • Wuuk Y0510: instructions, Amazon.de
      • Ingenic T31X SoC
        • 4 MP (2560x1440), 30 FPS
        • H.264, H.265 & MJPEG
        • XBurst MIPS CPU, 1.0 - 1.8 GHz, 22 nm
        • RISC-V coprocessor, 500 MHz
        • USB 2.0
      • Wi-Fi: 2.4 GHz & WPA2 only, no WPA3 support
      • PoE is possible with a separate PoE to USB-c adapter

Sensors

Manufacturers